Custom Manufactured Stamps for the Aerospace Industry
using CO2 Laser Technology
With a strong reputation for designing and manufacturing high-quality custom stamps, Innovative Ceramic Corporation was contacted by a Aerospace/Airline client from Newell, West Virginia to produce a series of custom peg stamps for the diaphragm industry. Using our advanced CO2 laser technology, we created three rubber stamps of various sizes, based off a customer supplied 2D print.
Each stamp featured the numbers “393” placed in the center of an “oval” shape. We also glued dies to both the foam and mount of every manufactured unit. The small stamp measured 0.065 of an inch high and 0.083 of an inch wide, with a number height and width measurement of 0.034 by 0.055 of an inch. The medium sized stamp measured 0.100 of an inch high and 0.127of an inch wide, with a number height and width measurement of 0.052 by 0.085 of an inch. Finally, the large stamp measured 0.172 of an inch high and 0.218 of an inch wide, with a number height and width measurement of 0.090 by 0.146 of an inch. Estimated part weight for all stamps equaled anywhere between 0.05 to 0.06 of an ounce.
After these custom peg stamps were manufactured, we then fully examined each stamp to ensure they met high client expectations for design and quality. Tests included optically checking the die contour, measurements to determine its relief and taking impressions to guarantee all peg stamps met superior standards. After all stamps were tested and approved for quality, we then packed and delivered these products to our customer’s facility in West Virginia.